Arduino Uno Mobile Controller Robot (Bluetooth and Cloud) This project is an Arduino Uno-based robot that can be controlled using Bluetooth and a cloud connection. The robot is equipped with a ...

This connects the transmit (TX) pin of the HC-05 Bluetooth module to pin 10 on the Arduino. Pin 10 is configured as the RX pin in the software serial port (BTSerial), meaning it will receive data from ...

The Arduino, Bluetooth module (check your specs, some HC-05, and HC-06 may come on a breakout board expecting 5V), and USB Host shield all run off of 3.3V, but devices you want to plug into the ...

By interfacing it using the Arduino Uno it was fairly easy to program the 6 motors and run them simultaneously. The entire arm is controlled by a smartphone using the HC-05 Bluetooth module, thus ...

It’s hard to imagine an easier way to set up communications between an Android device and an Arduino using Bluetooth than by following this guide. In the center of the breadboard you can see … ...

Looking for practical Arduino projects? This guide shows how to control a relay from your smartphone using an Arduino Uno — either via Bluetooth or Wi-Fi.

Lauterbach extends the range of Arduino supported boards and devices. After the successful integration of the »Pro Portenta H7«, Trace32 now also supports the Arduino »Nano 33 BLE« and »Nano 33 BLE ...

The HC-05, a Bluetooth to serial bridge, can be found for around $5 on the internet and therefore may be the cheapest way to add Bluetooth connectivity to your project. However, its default setting… ...